Woodworking Projects: Sand by Hand for a Satiny Finish

By February 12, 2018Uncategorized

Woodwork project plans like to make light of the finishing process. At least, some of them do. Yards of diagrams and typed instructions in carpentry project plans detail the placement of every cut, every nail, every screw. But if you've ever completed plans for furniture just to come to the last instruction and find "sand and stain as desired," you know that that finishing work is every bit as important as every other step in woodwork project plans, and is too often overlooked.

Various electric sanders are available, and they're constantly being improved. Some people might suggest that sanding be done by hand from the start, but with large woodworking projects this is not really practical. There's nothing wrong with using an electric sander for the initial portions of the furniture project. But for a truly silken finish, hand sanding is required for the last stage.

In order to achieve the satiny smooth furniture plans wood you require before staining or painting the finished project, sand with an electric sander as desired at first. Follow basic sanding techniques for each stage, as you would when hand sanding a woodworking project. You should sand with, rather than across, the grain of the wood. You can determine the grain either by sight or touch; if you can not see the grain, carefully run a finger over it. One direction should be reliably bridged while the other should be smoother.

Start with coarser sanding material and work your way to finer sandpaper for your woodworking furniture project. When the piece is smooth to the touch and / or you've exhausted the effect of electric sanding your woodwork project, it's time to move on to hand sanding.

You'll start with the largest grain sandpaper that makes the wood smoother; it should take only a few moments of testing to determine this. Once you've found the right wallpaper, cut it to size for your sanding block. A sanding block can be a simple block of wood you have handy, or it can be a commercially produced sanding block. These are designed specifically to hold the paper in place while sanding. You can get an inexpensive sanding block for your woodworking project ideas at your local hardware store.

Again, you'll want to progress to finer and finer grained sandpaper in order to obtain the softest, smoothest finish. As you sand, be sure to use a brush to remove sawdust from any joints and crevices; it will be more difficult to remove if you allow it to fill in the entire time you're sanding your furniture woodworking project.

Hand sanding your woodworking projects adds some time and effort to the process. However, it is well worth the beautiful results.

Source by Joe Moss

Leave a Reply

Skip to toolbar