Automated gardens are the most efficient way to grow fruits and vegetables. An outdoor garden can still be automated because the sun is the light and you have no control over that. Watering and feeding can also be automated to ensure your plants are getting everything they need. Self-watering containers may be the only way to keep plants from drying up in the middle of a hot summer day. If temperatures are getting above 85F your plants are probably thirsty! It is too big of a hassle to hand water your plants all day to ensure they get what they need. You may not be there when they need the water and your plants should not rule your life. You may be making a homeless ventilation system to water your plants while you are on vacation, but when you return you will ask yourself, "Why do not I always use an automated system?"
If you are new to drip systems you will want to read the Introduction to Drip Systems to get acquainted with the parts I'll be discussing. For this project you will need:
* 1/2 inch tubing
* 1/2 inch tube end clamp
* 1/4 inch tubing
* Drip line hole punch
* Submersible water pump
* Drip emitters
* Air pump
* Air tubing
* Air Stone
* Tupperware container
* Digital Timer
* Possibly extension cords
As always, your first step is to plan out your container garden. Find the arrangement you want to use to maximize sunlight. Keep in mind that your tubing will have to reach from your reservoir to your container garden. The size of your water pump will determine how much reach you have to play with. Do not forget your water pump also has power through your connections and drip emitters. Water pumps are one of the most expensive parts of the home made drip system, but they usually come with at least a one year warranty. Once you realize the productivity ratio of self-watering containers you will not want to go back to daily hand watering.
Put the end of the half inch tubing through one end of an end clamp and create a kink. Wrap the tube around the kink 2-3 times and thread the end through the other side of the end clamp. The result should be a closed off water proof end to create pressure through the drip system tubing. Put the other end of the 1/2 inch tubing on the end of the water pump.
Once your pump is assembled you are ready to make your drip lines. Punch holes in the half inch tubing where you want your 1/4 inch drip lines to start. Do not push through the vinyl or whatever material tubing you are using too hard or you will go through both ends and create a leak.
There is a wide array of drip emitters you can choose from at your hydroponics shop. You can get inline or compensating drippers which are explained in more detail in the Introduction to Drip Systems guide I mentioned earlier. You can also get mini sprinklers and other types of emitters for different purposes. This system is built with compensating drip emitters because the half inch tube sets on the ground and the 1/4 inch tubes climb the length of the container.
Put 1/4 inch straight connections on the end of the drip line with no drip emitter. The straight connector goes into the hole you made earlier in the half inch tubing. The connection is how water gets from your 1/2 inch main tube to your individual drip lines. Fewer connection bridges and fewer drip emitters means more power and further reach.
This is a lengthy guide for a homemade drip system, but bare with me and you'll be on your way to irritation freedom! Next step is to prepare your water reservoir. Drill or burn a hole through the side of your reservoir to put the half inch tube through. If you just want your lid to sit on top of your reservoir that is fine, you can tape it down. Expect greater evaporation rates and contamination if you do not use a sealed lid. Keep in mind a cleaner grow space is a better grow space.
You will have to put the end of the half inch tube that is connected to your water pump through the hole before connecting the pump. The water pump will not fit through your 1/2 inch hole! This step is really easy using a drill with a 1/2 inch circle drill bit. If you are using plastic make sure you do not crack the side of the reservoir. If it does crack easily you are probably using a material that is too weak to hold water for long periods of time.
For this outdoor reservoir I bought a container that already had holes in the handle. Since it could rain in the area where the reservoir is it could fill with rain water and knock the lid off the top. You can drill your own drain holes with a simple drill bit if you are planning to use a container without them.
Once your water pump is in place and suctioned down to the bottom of your reservoir you are ready to add the aeration device. The air pump will oxygenate the reservoir and ensure the water keeps moving. Stagnant water can get pretty nasty and your plants love oxygen in the root zone. If you are unsure on how to set up an air pump check out my guide on installing air pumps in hydroponic systems.
One thing you will probably not find at your local hydroponics shop is a cheap water proofed air pump. The lack of water proof air pumps seem to discourage most hydroponics gardeners from using the natural sun. A smart do it yourself gardener can find a solution. You will need to get a plastic container of some sort that comes with a lid that seals tight. Poke a hole in that container near the top. Make sure the hole is just big enough for your electric plug and air tube to come through. I used a screwdriver to create a small crack for both things to go through.
Put the air tubing through the hole before you connect it to the air pump. You do not want the hole to be bigger than it has to be. A large container is safer because the hole can be higher off the ground and away from potential flooding. Do not put the hole through the lid of the container because rain will get into your electronics!
I placed the reservoir and water proofed air pump in a covered area with electrical outlets. I had to use extension cords to get the air pump to reach the outlet. I also needed a 3-prong extension cord for the water pump. The digital timer you use to automatically turn your water pump on and off also needs to be in a covered area where rain can not get into the parts.
Novice gardeners – do not get the idea air pumps are too complex or unnecessary for you. That's your first mistake as a novice gardener! Automate your electricity and add oxygen and whatever else the plants need. Reaching for 100% is how you get perfect plants!
Your friends will be jealous when they see how "high tech" your garden is! Now that your reservoir is up and running you are ready to finish your automated drip system.
Position your containers around the drip line so all the lines can reach their desired area. I used two drip emitters per container because they are three gallons and up. On 1 -2 gallon containers one drip emitter may cover the whole medium over a drip period of a few minutes. At the very least it will keep your plants alive while you are on vacation. Having a small drip cycle with outdoor plants will adjust for rain. Say you are gone for a week and it rains for three of those days. Those three days it was unnecessary for your drip system to run! It may have had a detrimental factor because of excessive watering. Make sure your containers have good drainage and choose your medium carefully. Well mixed growing mediums are key to ensuring your plants succeed. Different plants benefit from different growing environments and growing mediums.
TIP: Some digital timers come with a day setting. The day setting will allow you to run your drip system every other day or in different intervals. You may want your drip system to run 3 times a day alternating with 1 time a day. If this tip is confusing you, come back to it later when you have worked with timer settings for your drip system.
Source by Dustin Rea